1:10 Scale Aston Martin Nitro RC Car - Ready To Run
This is an Aston Martin nitro RC car, and it has all of the features that you want in a remote
- -A shaft-driven 4wd system that is superior to
belt-driven systems on other RC nitro vehicles, which means you don't
have to worry about belt tension and deflection, and forget about slippage!
- -A No-Flex Aluminum chassis, that is both lightweight and sturdy, letting the suspension
stiffness be raised without worry!
- -A Servo-Saver Linkage System, and Front U-Joint let you worry about winning the
race, not replacing servos or power transmission!
- -High Traction Tires so you can really pull the car around corners, then get right back
on the gas without delay!
- -Precut Foam Bumper, to protect the sensitive electronics from damage if you were to
hit something at the amazing top speed of 65mph!
 
This gas powered RC Car is a smooth and sleek beauty, but the flowing lines hide a race-worthy, puma-like performance machine, equipped with the 15CXP, quite a versatile powerplant indeed. This .15 nitro engine is quite capable of slinging this car forward at astounding speeds! It is also a stout and reliable performer, an important concern. This gas powered RC car uses an advanced 4WD system that distributes the torque efficiently, resulting in less wasteful wheelspin, letting those high-traction tires focus on their real task, turning, yet at the same time sending you flying down the straights, and powering around the corners!
Features:
- Fully Assembled Nitro RC Car Chassis
- Powerful 15CXP Nitro RC engine, pull start, equipped with carburetor, air filter, and muffler.
- Shaft Driven Four Wheel Drive system
- built-in front and rear bevel gear differentials!
- adjustable width Double wishbone suspension geometry
- Oil filled dampers
- Sturdy, weight-saving aluminum chassis
- Disc brake system
- Top Speed:45-50 MPH
Important Dimensions:
Length ---------------------380mm
Width---------------------200mm
Wheelbase---------------------260mm
Tread (F/R)---------------------192mm
Wheel Diameter (F/R)---------------------66*26mm
Weight ---------------------1650g
Engine---------------------15CXP
 
This car shares a 90% part commonality with other brands such as Traxxas, HPI & etc. You can change the body shell into that of a Mercedes, Mustang, Skyline & more! You can upgrade/modify the car with commonly available parts! You can also add new tires, suspension & more!
****These cars are Smartech Gas Cars. All Gas Cars under Smartech products have a 6 month WARRANTY on the Engine and Radio Control. The Warranty card can be returned back to our Service Center in California. All the information is included with your Gas Car.******
 
|
Large View